フィードバック
日本語
トレンド

LIS2DH12TR: MEMS digital output motion sensor

The STMicroelectronics LIS2DH12TR is a low-power, three-axis accelerometer from the LIS2DH series. It provides accurate acceleration measurements and is widely used in various applications that require acceleration detection, such as consumer electronics, industrial equipment, motion tracking, automotive electronics, etc.

ADM2587EBRWZ: Signal and Power Isolated Data Transceiver

ADM2587EBRWZ is an isolated RS-485/RS-422 transceiver chip produced by Analog Devices, which can be configured as half-duplex or full-duplex.

Microcontroller ATmega series: ATMEGA8A-AU Introduction

The ATMEGA8A-AU is a popular 8-bit microcontroller from Microchip Technology (formerly Atmel) and part of the ATmega series. It is based on the AVR architecture and is designed for a wide variety of embedded applications.

STM32F030K6T6 Development Board Introduction

STM32F030K6T6 is a microcontroller (MCU) based on the ARM Cortex-M0 core produced by STMicroelectronics.

MPU-6050: High-Performance 6-Axis Motion Sensor with I2C Bus Interface

The MPU-6050 is a widely used Inertial Measurement Unit (IMU) that combines a 3-axis accelerometer and a 3-axis gyroscope.

Texas Instruments TPS51200DRCR

The TPS51200DRCR is a high-efficiency dual-channel synchronous step-down converter produced by Texas Instruments (TI) and is commonly used in applications that provide regulated power, especially in systems that require low power consumption and high-efficiency power management.

STMicroelectronics STM32F103VET6

STM32F103VET6 is a 32-bit microcontroller based on the ARM Cortex-M3 core produced by STMicroelectronics. It belongs to the high-performance product line of the STM32F1 series and is widely used in embedded applications such as industrial control, IoT devices, and home appliance control.

STMicroelectronics STM32F105VCT6

STM32F105VCT6 is a versatile and powerful microcontroller that combines an ARM Cortex-M3 core with a rich set of peripherals and low power consumption. Its 128 KB Flash, 16 KB RAM, and extensive I/O options make it a suitable choice for a variety of embedded applications in industrial, automotive, and consumer markets. Its robust features, such as USB, CAN, ADC, and DMA, along with low-power operation, make it a solid solution for systems requiring real-time processing and efficient power usage.

Texas Instruments ULN2003ADR

ULN2003ADR is a common high current power driver produced by STMicroelectronics. It is a variant of the ULN2003 series and is usually used to control high current loads such as stepper motors, relays, solenoid valves, etc.

ATMEGA328P-PU

ATmega328P-PU is an 8-bit microcontroller manufactured by Microchip Technology (formerly Atmel), widely used in embedded systems and development boards, especially popular on the Arduino platform.

STM32F407VGT6 Microcontroller

TM32F407VGT6 is a powerful and flexible microcontroller suitable for a variety of embedded applications. Its high performance, rich peripheral interfaces and powerful processing capabilities make it an ideal choice for developing complex systems.

MCIMX6G2CVM05AB

MCIMX6G2CVM05AB is a powerful application processor that combines high-performance processing capabilities and rich multimedia functions, making it very suitable for a variety of embedded applications. Its low power consumption characteristics and flexible interface design enable it to perform well in various industrial and consumer applications.

STM32F405RGT6

The STM32F405RGT6 is a high-performance 32-bit microcontroller produced by STMicroelectronics. It is based on the ARM Cortex-M4 core and is suitable for embedded applications that require high performance and processing power.

STM32F030C8T6

STM32F030C8T6 is a powerful and affordable microcontroller suitable for a variety of low-power and low-cost embedded applications. Its flexible peripherals and diverse application areas make it a popular choice for developers.

ULN2803ADWR

Overview of ULN2803ADWR features, functions, similarities, pinouts and related Q&A

W25Q128JVSIQ

Hedy · Dasenic Sep 23,2024 389

W25Q128JVSIQ Introduction

W25Q128JVSIQ is a NOR Flash memory chip produced by Winbond Electronics, belonging to the W25Q series. It is designed to provide high performance, reliability and non-volatile storage of large amounts of data. This chip is widely used in many electronic products due to its high storage density and reliable performance.

W25Q128JVSIQ main functions and features:

Fast read: supports 4KB small sector erase and 64KB sector erase, as well as full block erase.

Programmability: supports page-sized byte programming, with a page size of 256 bytes.

Low power consumption: There are multiple power-saving modes, such as standby mode and deep power-down mode, to reduce power consumption.

Security features: supports 4KB independent writable protection area, which can be used to store critical data. In addition, it has a programmable write protection function to prevent accidental modification of stored data.

Applications of W25Q128JVSIQ:

W25Q128JVSIQ is widely used in devices that require non-volatile storage, such as:

Consumer electronics (smartphones, tablets, cameras, etc.)

Industrial control systems

Internet of Things devices

Automotive electronic systems

Wearable devices

W25Q128JVSIQ Parameters

W25Q128JVSIQ Similar Prodcuts Comparison

W25Q128JVSIQ vs MX25L512EMI-10G vs MX25U1635FM2I-10G vs SST26VF016B-104I/SN vs MX25U6435FM2I-10G Comparison

ParameterW25Q128JVSIQMX25L512EMI-10GMX25U1635FM2I-10GSST26VF016B-104I/SNMX25U6435FM2I-10G
Image
ManufacturerWinbondMacronixMacronixMicrochip (SST)Macronix
Memory TypeSerial NOR FlashSerial NOR FlashSerial NOR FlashSerial NOR FlashSerial NOR Flash
Density128 Mb (16 MB)512 Mb (64 MB)1632 Mb (204 MB)16 Mb (2 MB)512 Mb (64 MB)
InterfaceSPI (Serial Peripheral Interface)SPISPISPISPI
Package TypeSOIC-8, WSON-8, othersSOIC-8, WSON-8, othersSOIC-8, WSON-8, othersSOIC-8, WSON-8, othersSOIC-8, WSON-8, others
Voltage Range2.7V to 3.6V2.7V to 3.6V2.7V to 3.6V2.7V to 3.6V2.7V to 3.6V
Read Speed104 MHz133 MHz133 MHz104 MHz133 MHz
Write Speed20 MB/s (typical)33 MB/s (typical)33 MB/s (typical)20 MB/s (typical)33 MB/s (typical)
Page Size256 Bytes256 Bytes256 Bytes256 Bytes256 Bytes
Block Size64 KB64 KB64 KB64 KB64 KB
Program Time (per word)0.5 ms (typical)0.5 ms (typical)0.5 ms (typical)0.5 ms (typical)0.5 ms (typical)
Erase Time (per sector)20 ms (typical) 20 ms (typical) 20 ms (typical) 20 ms (typical) 20 ms (typical)
Data Retention20 years (typical)20 years (typical)20 years (typical)20 years (typical)20 years (typical)
Endurance (Program/Erase)100K cycles100K cycles100K cycles100K cycles100K cycles
Temperature Range-40°C to +85°C-40°C to +85°C-40°C to +85°C-40°C to +85°C-40°C to +85°C
Special FeaturesLow power consumption, 4KB sectorLow power consumption, 4KB sectorLow power consumption, 4KB sectorLow power consumption, 4KB sectorLow power consumption, 4KB sector


W25Q128JVSIQ: A smaller 16 MB memory option suitable for low-to-medium capacity applications. It offers lower read speed but is still suitable for many embedded applications requiring small data storage.

MX25L512EMI-10G and MX25U6435FM2I-10G: Both offer 64 MB of flash, with high-speed read/write capabilities, making them ideal for applications needing larger storage and faster performance.

MX25U1635FM2I-10G: The largest option with 204 MB of flash, ideal for high-capacity applications that require more storage space.

SST26VF016B-104I/SN: A low-capacity 2 MB flash option, ideal for systems with space constraints or low data storage needs.


W25Q128JVSIQ pinout

W25Q128JVSIQ Pin Diagram

W25Q128JVSIQ Datasheet PDF and Reference Manual

Download datasheets and manufacturer documentation for W25Q128JVSIQ

W25Q128JVSIQ Datasheet




FAQs for W25Q128JVSIQ

1. What is the memory capacity of W25Q128JVSIQ?

The memory capacity of W25Q128JVSIQ is 128 Mb, or 16 MB.

2. What interface modes does W25Q128JVSIQ support?

W25Q128JVSIQ supports the following interface modes:

Standard SPI (Serial Peripheral Interface)

Dual I/O SPI (dual output/input)

Quad I/O SPI (quad output/input)

Among them, Quad I/O SPI provides faster data transfer speeds, up to 133 MHz.

3. What is the operating voltage range of W25Q128JVSIQ?

The chip operates in a voltage range of 2.7V to 3.6V, which is a standard 3V system.

4. What erase operations does the W25Q128JVSIQ support?

The W25Q128JVSIQ supports the following erase operations:

4KB small sector erase

64KB sector erase

Whole block erase

These erase options enable it to be flexibly applied to different data management scenarios.

5. What security features does the W25Q128JVSIQ have?

The W25Q128JVSIQ provides a variety of security features, including:

4KB independent write protection area for storing critical data.

Programmable write protection function to prevent unauthorized write operations.

Software and hardware write protection mechanisms that can be configured to protect specific storage blocks.

6. What is the operating temperature range of the W25Q128JVSIQ?

The W25Q128JVSIQ has an operating temperature range of -40°C to +85°C and is suitable for use in industrial environments.

7. What low-power modes does the W25Q128JVSIQ support?

The W25Q128JVSIQ supports standby mode and deep power-down mode

8. What applications is the W25Q128JVSIQ commonly used for?

The W25Q128JVSIQ is widely used in a variety of devices and scenarios, including:

Consumer electronics (such as smartphones, tablets, cameras, etc.)

Industrial control systems

Internet of Things devices

Automotive electronic systems

Wearable devices

9. What is the difference between the W25Q128JVSIQ TR and the W25Q128JVSIQ?

The two are exactly the same in function and performance, but W25Q128JVSIQ TR uses Tape & Reel packaging, which is usually used in automated production lines, while W25Q128JVSIQ uses bulk packaging (tray or tube packaging), which is suitable for small batches or manual assembly.

10. How to choose the package type of W25Q128JVSIQ?

W25Q128JVSIQ usually has an 8-pin SOP package. The choice of package type mainly depends on the layout and manufacturing process of the PCB board used. If it is an automated production line, it is recommended to choose the TR (Tape & Reel) version.

  • RFQ